Installer WaterCop Automatic Leak Detection

& Water Shutoff Systems

WaterCop Automatic logo trans.gif

Protect your home or business from costly water damage. 

Stop water damage before it starts! 

WaterCop valve and actuator.jpg
  • Protects your home 24 hours a day, home or away

  • Battery operated wireless sensors

  • Electrically operated ball valve, shuts of water to home

  • Added Peace of mind

WaterCop PRO
Battery Powered Sensors and Hardwired Sensors

The WaterCop system uses an automatic shut-off valve installed on the water supply line of a home or commercial building. When sensors detect a leak, a signal is sent to the shut-off valve and water flow is quickly stopped to downstream areas reducing the chance of major flooding.

WaterCop Sensor Locations.jpg
WaterCop Installing Dealer logo.jpg

Water Heaters
Washing Machines
Toilets
Sinks
Ice Makers
Refrigerators
Dishwashers
Automatic Humidifiers

Washing machine hoses split, supply pipes can freeze and burst, dishwashers and toilets leak, and water heaters simply wear out. All of these can result in needless expensive property damage. Items such as important personal documents, art, antiques, historic flooring, precious photographs, and digital files are difficult, if not impossible to replace. 

How the System Works

 

Flood sensors constantly monitor their selected areas for accumulating moisture. When a leak is detected, a sensor will send a radio frequency signal (RF) to the WaterCopPRO Integrated Water Control Panel, instructing it to close through the Water Control Panel. The wireless sensors are battery powered devices, enabling them to be located anywhere a leak is likely to occur, or where water might cause damage. The WaterCop PRO Integrated Actuator is powered through the Water Control Panel, which requires household electrical power (common 115 VAC, grounded outlet) and will not operate during a power outage unless receiving auxillary power from a backup device such as an uninterruptible power supply unit (UPS). Additionally, the user of a certified serge protection device is highly recommended. 

When leaking water comes into direct contact with a flood sensor's probe, an RF signal is transmitted to the Water Control Panel and the valve closes, turning off the water source to protect the building from additional water damage. 

WaterCop valve and actuator.jpg

VALVE

Sensor alarm on control panel 2.jpg

CONTROL PANEL

IMG_1061 (2)_edited.jpg

SENSOR

Servicing the North Metro Atlanta area, including: 

Roswell   Alpharetta   Milton   Sandy Springs   Dunwoody    Johns Creek   Crabapple   Cumming   Atlanta   Marietta   East Cobb   Norcross   Woodstock   Buckhead  Brookhaven  Virginia Highlands ,  Ansley Park   Vinings   Intown   Atlanta   North Fulton County